Refinishing a wood floor yourself is a tedious job but something that can be done by the average homeowner.
The first step is to figure out exactly what type of wood is on your floors. Most wood floors will be made of a hardwood like oak or maple. Some will be made of heart pine, a soft wood that is found in many old homes. Heart pine and maple are harder to refinish than oak, but they can be done with careful consideration to their unique characteristics.
Now let’s sand them. Random orbital sanders are the best choice for DIY floor refinishers. They take longer to remove old finishes than drum sanders, but they do not require a lot of experience to use and are less likely to damage your floor. With a random orbital sander, you can move with or against the wood grain. If nail heads are beginning to show then the wood is too thin to sand. Be very careful with sanding as if you make a mistake, it’ll show. However, a refinished floor can bring beauty to a room like no other project.After you decide what you will be applying it is time to apply the stain. Use a high quality natural bristle brush or foam applicator to cut in along the edges and corners. Be careful about dripping and layers that are too thick. While the finish is still wet, blend in any brush marks with a lamb’s wool or foam applicator.A sealer coat is not normally needed, but if your floor takes stain unevenly, it will help ensure even stain coverage. Test for this by applying stain to an area that will not be visible once furniture is moved back into place. It is important to apply the sealer evenly.
